Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (2022)

Unsure if you need a single or double bevel miter saw? Wonder what the difference is? I’ll break it down and help you decide which is best for you.

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (1)

Do you know the difference between a single bevel miter saw and a double bevel miter saw? If not, don’t worry! In this article, I’ll explain the differences between these two power tools, what each saw is typically used for, and the benefits and drawbacks of each. By the end, you’ll know which type of miter saw is right for you!

This tutorial contains affiliate links to supplies and tools. Purchases made using these links help support the Saws on Skates website and allows me to share more projects and tips with you. There is no cost to you for using these links. Visit my site policies for more information.

Table of Contents

  • What Type of Cuts Can Make With a Miter Saw?
  • What is a Single Bevel Compound Miter Saw?
    • What is a Single Bevel Miter Used For?
    • Single Bevel Miter Saw Pros and Cons
  • What is a Double Bevel Compound Miter Saw?
    • What is a Dual Bevel Miter Used For?
    • Double Bevel Miter Saw Pros and Cons
  • What are the Differences Between a Single Bevel and Dual Bevel Miter Saw?
  • More Miter Saw Considerations
  • Which Miter Saw Should You Buy?
  • Frequently Asked Questions

What Type of Cuts Can Make With a Miter Saw?

Before we get into the differences between a single bevel miter saw and a double bevel miter saw, let’s first discuss the four cuts you can make with a miter saw.

Crosscut

A crosscut, often referred to as a cut, is made by adjusting the blade to 90 degrees, positioning the workpiece against the fence, and lowering the blade to make the cut. Crosscuts change the length of boards.

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (2)

Miter Cut

A miter cut is made by rotating the blade from left to right using the handle at the front of the saw. Miter cuts change the length of boards at an angle other than 90 degrees. For example, you can set the angle to 45 degrees to cut parts for picture frames.

(Video) If you use a circular saw, you ABSOLUTELY NEED TO SEE THIS TOOL!

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (3)

Bevel Cut

A bevel cut is made by tilting the blade from top to bottom at an angle other than 90 degrees using the bevel adjustment at the back of the saw. Bevel cuts change the shape of a board’s profile along its thickness.

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (4)

Compound Cut

A compound cut combines a miter cut and a bevel cut, in other words adjusting the blade from left to right and tilting it from top to bottom. Compound cuts are often used to cut crown molding.

TIP: A miter saw is also called a compound miter saw since it can produce compound cuts.

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (5)

What is a Single Bevel Compound Miter Saw?

Now that we know the different types of cuts you can make with a miter saw, let’s discuss single bevel miter saws.

A single bevel miter saw has a blade that pivots in only one direction. Most single bevel saws have a blade that tilts to the left, but some tilt to the right.

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (6)

Single bevel miter saws can make crosscuts and miter cuts, but you can only tilt the saw head in one direction to make bevel and compound cuts. In other words, if you are trying to cut crown molding, you will need to flip the workpiece over to make the opposite bevel cut.

While this may not seem like a big deal, it can be a hassle if you are working with long pieces of wood, or if you have a lot of crown molding to install. It also reduces accuracy since you have to reposition the workpiece for each cut.

Single compound saws are still an excellent option for many DIYers. They are relatively affordable, making them well-suited for beginners just getting into woodworking. Plus, they are typically small and light, making them easy to transport from one job site to another.

(Video) How to Change the Blade on a Miter Saw

What is a Single Bevel Miter Used For?

Single bevel miter saws are typically used for basic tasks, such as cutting boards to length and making miter cuts. They can also be used for bevel and compound cuts, but as I mentioned earlier, you will need to flip the workpiece to make the opposite bevel cut.

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (7)

Single Bevel Miter Saw Pros and Cons

Pros

  • Can make crosscuts, miter cuts, bevel cuts, and compound cuts
  • Relatively affordable
  • Good for beginners getting into woodworking

Cons

  • Not as versatile as a double bevel miter saw
  • Blade tilts in only one direction
  • You will need to flip the workpiece to make the opposite bevel cut
  • Can be a hassle when you have to make a lot of compound cuts

What is a Double Bevel Compound Miter Saw?

Now that we’ve covered a single bevel miter saw, let’s move on to a double bevel miter saw.

As you may have guessed, a dual or double bevel miter saw has a blade that pivots in two directions.

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (8)

Double bevel miter saws can make both crosscuts and miter cuts, and you can tilt the blade to the left or right to make bevel cuts and compound cuts. This means if you are cutting crown molding, you won’t need to flip the workpiece to make the opposite cut; instead, you’ll adjust the saw blade.

What is a Dual Bevel Miter Saw Used For?

Double bevel miter saws are used to make miter cuts and cut boards to length, but where they really shine is by making bevel cuts and compound cuts without needing to flip your workpiece.

While double bevel miter saws are more versatile and convenient than single bevel miter saws, they are also more expensive.

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (9)

Double Bevel Miter Saw Pros and Cons

Pros

  • More versatile and convenient than a single bevel miter saw
  • Blade tilts in two directions

Cons

  • More expensive than a single bevel miter saw

What are the Differences Between a Single Bevel and Dual Bevel Miter Saw?

Single bevel and double bevel saws both makecrosscuts,miter cuts,bevel cuts, andcompound cuts, but there are also several key differences between them.

Pivot Direction

The primary difference between a single bevel and dual bevel miter saw is the direction their blades can pivot. A single bevel miter saw blade can only tilt in one direction (usually to the left), while a dual bevel miter saw blade can tilt in two directions, either left or right.

(Video) How to Build a DIY Mobile Miter Saw Stand

With a single bevel miter saw, you will need to flip the board to make a bevel cut on the opposite side. With a dual bevel miter saw, you can simply pivot the saw head to make bevel cuts on both sides without having to flip the board.

This is a huge time saver when working on a big project, such as installing crown molding.

Cost

Another key difference between these saws is the cost. Single bevel miter saws are typically less expensive than dual bevel miter saws, making them a more budget-friendly option for DIYers and hobbyists.

Versatility

When it comes to versatility, dual bevel miter saws are the clear winner. Their ability to tilt in two directions gives them a distinct advantage over a single bevel miter saw that can only tilt in one direction.

A single bevel miter saw will be sufficient if you only need to make simple crosscuts and miter cuts.

More Miter Saw Considerations

There are more considerations when it comes to choosing a single or dual bevel saw.

  • Blade Size
    The most popular miter saw blade sizes are 10″ and 12″, while 7-¼” and 8-½” blades are used on some smaller miter saws.
  • Sliding Compound Miter Saw
    A sliding compound miter saw performs the same functions as a compound miter saw, but it also has the ability to slide the blade back and forth on a rail. This gives the saw a greater cutting capacity than a standard miter saw.

Which Miter Saw Should You Buy?

Now that we know the difference between a single bevel miter saw and a double bevel miter saw, you may be wondering which one you should buy.

The answer to this question depends on your needs and budget. If you’re just getting into woodworking or only plan on using your miter saw for basic projects, such as cutting boards to length or making picture frames, a single bevel miter saw may be all you need. However, a dual bevel miter saw is the better option if you are looking for a more versatile tool that can easily handle larger projects, such as installing crown molding.

(Video) How to Use a Kreg Pocket Hole Jig 320

Of course, the decision ultimately comes down to you. Consider your budget and what cuts you need to make most often when making your selection to ensure you get the best miter saw for your needs.

Frequently Asked Questions

Is a double bevel miter saw necessary?

No, a double bevel miter saw is not necessary. A single bevel miter saw may be all you need if you only want to make simple crosscuts and miter cuts. Single bevel saws can also make bevel and compound cuts, but keep in mind you’ll need to flip the board to make the opposing bevel cut. Consider a dual bevel miter saw if you’ll often need to make bevel and compound cuts.

What are the benefits of a double bevel miter saw?

The main benefits of a double bevel miter saw over a single bevel miter saw is its versatility and convenience. With a dual bevel miter saw, you can make bevel and compound cuts on both sides without having to flip the board, which saves time when working on big projects.

Is single or double bevel better?

Both single and double bevel miter saws have their own benefits. Single bevel miter saws are typically less expensive than dual bevel miter saws, making them a more budget-friendly option for DIYers and hobbyists. If you only need to make simple crosscuts and miter cuts, a single bevel miter saw is a good choice. However, if you are looking for a more versatile tool that can handle more complex projects, a dual bevel miter saw is the better option.

Final Thoughts

Now that you know the difference between a single bevel miter saw and a double bevel miter saw, you can decide which one is right for you. Consider your projects and budget when making your decision to ensure you get the best miter saw for your needs.

Thank you for stopping by. If you enjoyed this tutorial, would you please take a moment and pin it to Pinterest? I’d really appreciate it!

Pin This For Later

Single vs Double Bevel Miter Saw (Which to Buy & Why) | Saws on Skates® (10)

FAQs

Is single bevel or double bevel better? ›

The difference between a single and dual bevel miter saw is that a single bevel saw can only cut a bevel in one orientation, usually to the left. A dual bevel miter saw can swivel to the left or right, making it possible to cut a bevel in both orientations without the need to reposition the workpiece.

Why do I need a double bevel miter saw? ›

Double bevel miter saws allow you to make precise and uniform cuts on both sides of your workpiece. It also makes the job easier and quicker, as you can make faster repetitive cuts even on longer workpieces. For contractors or highly committed hobbyists, a dual bevel miter saw will improve your workflow and efficiency.

What is the main advantage of sliding miter saws over other types of miter saws? ›

A sliding miter saw is a type of miter saw that adds rails to let the saw blade slide front to back across the wood. It gives you a much greater depth of cut than the same size miter saw without rails. Most sliding miter saws also include the ability to make a compound cut.

What are the advantages of having a dual compound miter saw? ›

They offer the advantage of making compound cuts in one pass. Dual compound miter saws function like compound miter saws. While compound miter saws tilt in only one direction, dual compound miter saws can tilt both left and right. They can quickly create bevels at any angle.

Can a 12 inch miter saw cut 4x4? ›

Yes, a 12 miter saw can cut a 4×4. However, the size of the blade will determine how thick of a cut you can make. If you have a blade that is only a few inches in diameter, you may only be able to make a shallow cut. If you have a blade that is a foot or more in diameter, you will be able to make a deeper cut.

What is the difference between a dual bevel and a double bevel miter saw? ›

Double bevel miter saws can tilt to cut a bevel cut both to the right and left of the 90 degree position. You can make a bevel cut and then flip the saw to the other side to make a bevel cut in the opposite direction. With a double bevel miter saw, you flip the saw. With a single bevel miter saw, you flip the wood.

How do you cut crown molding with a single bevel miter saw? ›

How to Cut Crown Molding Flat with a DEWALT Miter Saw - YouTube

What is the difference between a chop saw and a compound miter saw? ›

Whereas chop saws are rugged and relatively simple tools, mitre saws are designed and manufactured to make precision cuts at many different angles. Although a mitre saw can cut non-ferrous metal when used with the correct blade, they are most often used by joiners, kitchen fitters and cabinet makers to cut wood.

What is the advantage of single bevel broadheads? ›

The most obvious functional difference between single and double-beveled broadheads is the rotation single-bevels induce as the broadhead penetrates. Everyone knows that arrows rotate in flight, because of the effect of the fletching. Few, however, give arrow rotation any thought beyond that.

Is it worth getting a sliding mitre saw? ›

A sliding miter saw offers the best versatility when it comes to compound angle cuts. It also helps you work on longer pieces while ensuring great efficiency through your cutting process. A sliding miter allows the blade not only to pivot, but also to tilt along the axis of the blade and move along the rails.

What is the advantage of a sliding mitre saw? ›

The primary advantage of the sliding compound miter saw is its ability to cut wider workpieces. Your standard miter saw can cut materials that are 6 to 8 inches thick with relative ease.

How do I choose a miter saw blade? ›

A general rule of thumb is that a bigger number of blade teeth will result in a smoother cut. The smallest number of blade teeth is 24 and this count is typical for a ripping blade. Thus, the type of job you're intending to do will determine the appropriate number of miter saw blade teeth.

How wide of a board will a 10-inch sliding miter saw cut? ›

A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.

How wide of a board can a 12-inch sliding miter saw cut? ›

Saws start to differ when you look at their blade diameter—commonly 10 inches or 12 inches. The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.

What's the difference between a miter saw and a sliding miter saw? ›

A sliding miter saw is very similar to a miter saw except that instead of just pulling the blade down, you can also pull it towards you. So the sliding miter saw can cut a much wider board than a non-sliding miter saw can. You will not have to flip the board and cut the other side as you would with the non-sliding.

What size miter saw Do I need to cut 4x4? ›

The short answer is, that you need a 12-inch miter saw. And this is something you'll have to consider when contemplating buying either a single bevel or vs dual bevel miter saw as the size and cutting capacity vary most in these two types of saws. A 12” miter saw clearly has a bigger blade.

What saw is best for cutting 4x4 posts? ›

Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.

Can you use a miter saw like a table saw? ›

A compound miter saw can make cross cuts, angled cuts, angled cross cuts, bevel cuts, and more. While they cannot handle as large of work pieces as table saws, they can make more types of cuts than the table saw. With that being said, one type of cut which the miter saw cannot make is the rip cut.

What is the difference between a compound and a sliding compound miter saw? ›

The difference lies in the width of the material that each can handle. The whole difference lies in the word “sliding”. A sliding miter saw can basically do everything a compound miter saw can in addition to having rails that enable you to slide the saw backward and forward.

What are bevel cuts used for? ›

A bevel cut is an angled cut in which the top of the wood is not perpendicular to the edges. Bevel cuts can often be made with a circular saw, table saw or a mitre saw. They will have an angled edge and are used for things such as the edge of a table to prevent sharp corners.

What is the difference between a miter cut and a bevel cut? ›

A miter is an angled cut made across the face, or width, of a board. A bevel is an angled cut made through the thickness of a board. Any miter saw can cut a miter and a bevel, depending on how the board is placed onto the saw.

What type of miter saw is best for crown molding? ›

A power miter saw is the best way to cut crown moulding once you measure the angles. The saw can be adjusted to cut at any angle – set it to 45 degrees for one side of a standard 90-degree corner. The saw can be set to 45 degrees to the left or 45 degrees to the right.

What is the difference between 52 38 and 45 45 crown molding? ›

To find out what the spring angle is, set the crown molding into the crotch of a framing square and check where the ends align. if both numbers are the same, it is 45/45 crown. If the numbers are different, such as three inches on the wall and two inches on the ceiling, it is 52/38 crown.

Do you need a compound miter saw for crown molding? ›

Things You'll Need

Corner joints in crown molding are "compound" because each cut end has two angles -- a miter angle and a bevel angle. Compound saws are advantageous because the saw tilts to cut the bevel and rotates to the left or right to cut the miter, making both angles with a single cut.

Can you cut concrete pavers with a miter saw? ›

A miter saw as long as you have the right blade, can cut concrete pavers and many other types of pavers too. That said, you may also use a hammer and chisel, which is fine if you just have a few stones and don't need the cuts to be clean.

Can you use a regular miter saw to cut metal? ›

Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.

Can I use my miter saw as a chop saw? ›

Miter saws and chop saws are not the same, even if the descriptions may sound similar. A chop saw is used for straight precision cuts, and a miter saw is used for angled cuts. Though it's tempting to try to adjust the miter saw to work as a chop saw, the results will not be as good.

Do I need left or right bevel broadheads? ›

If your arrows are fletched with right wing feathers, you should use right beveled broadheads; likewise, use left beveled broadheads if you use left wing feathers. (With straight fletching, it really doesn't matter which bevel you use as there is very little rotation of the shaft.)

What is the difference between a single bevel and double bevel Broadhead? ›

An added benefit of single-bevel heads is that they supposedly spin around bone. This might happen but is far from guaranteed. Double-bevel heads, on the other hand, feature two ground angles in the metal that meet to create a sharp edge.

Which way do single bevel broadheads turn? ›

Understanding Right And Left Wing Feathers And Single Bevel ...

What is the difference between a sliding and non sliding miter saw? ›

A non-sliding compound miter saw has a fixed blade that can be angled to different degrees. A sliding compound miter saw allows the blade (and thus angle) to be changed without unplugging it from its power source. Sliding miter saws also have dual rails or tracks, meaning they can cut through materials up to 2″ thick.

Do you need a laser on a miter saw? ›

How to Attach a Miter Saw Laser - YouTube

What do you use a compound miter saw for? ›

A compound miter saw is widely-regarded as the most accurate tool for making crosscuts on wood, whether those cuts are square, angled or beveled. In many cases, these saws will allow the user to angle and bevel the cut at the same time, creating precise yet complex compound cuts.

Are sliding miter saws safe? ›

Miter saws are pretty safe, for saws at least. Given that they're relatively stationary and have automatic blade guards, it's almost difficult to inadvertently cut yourself. The one way to do so? Put your hand in the path of the blade.

What are the different types of miter saws? ›

There are three types of mitre saws: sliding, compound and sliding compound.
  • Sliding Mitre Saws. Sliding mitre saws have their blade mounted to a sturdy metal track similar to radial arm saws. ...
  • Compound Mitre Saws. ...
  • Sliding Compound Mitre Saws.

What is a double bevel sliding mitre saw? ›

(37 products) With a double bevel sliding mitre saw the workpiece never has to be flipped or rearranged to make bevel cuts or other cuts on different sides. They are very versatile so can quickly create cuts at any angle.

Which saw blade makes the smoothest cut? ›

With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are the go-to choice for finish carpentry and other applications that require precision and a smooth finish.

How many teeth should my miter saw blade have? ›

Miter-saw blades- 80 tooth.

Is more teeth on a saw blade better? ›

Number of Teeth

Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.

Can a 10-inch sliding miter saw cut 2x12? ›

10-inch. The takeaway: Their larger blades allow you to crosscut stock up to a 2×12, and have enough vertical capacity to cut common trim sizes, both standing up and nested, or to slice through a 4×4 in one pass.

How long does a Mitre saw last? ›

They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they're used to cut.

Will a 10-inch miter saw cut a 1x6? ›

Most 10” motorized miter saws can make crosscuts up to 5½” wide. In order to make wider cuts, add 2”x6” blocks of wood to the miter saw table. This raises the cutting surface up to a wider part of the blade, allowing for crosscuts about 1″ wider (6½” wide on most 10” miter saws). Watch this video to find out more.

How thick can a 10 miter saw cut? ›

The 10-inch miter saw is a common power tool used for cutting different sizes of wood. This includes the 4×4 as the cutting depth of a 10” saw is roughly 5 ½”. This means that you can make the cut in one pass. However, because of the depth, it will not be an easy cut to make.

How do you cut a wide board with a sliding miter saw? ›

How To Crosscut Wide Boards on a Miter Saw - YouTube

Can you cut big pieces of wood with miter saw? ›

Cutting Wide Boards - YouTube

Is a double bevel miter saw worth it? ›

Double bevel miter saws allow you to make precise and uniform cuts on both sides of your workpiece. It also makes the job easier and quicker, as you can make faster repetitive cuts even on longer workpieces. For contractors or highly committed hobbyists, a dual bevel miter saw will improve your workflow and efficiency.

What's the difference between a single and double bevel miter saw? ›

The difference between a single and dual bevel miter saw is that a single bevel saw can only cut a bevel in one orientation, usually to the left. A dual bevel miter saw can swivel to the left or right, making it possible to cut a bevel in both orientations without the need to reposition the workpiece.

What does cross cut mean on a mitre saw? ›

This miter saw from DeWalt has a cross-cut capacity of 2-in. x 6-inches. That means that if a board is wider than six inches, you can't cut it all the way through because the blade won't reach. Many modern miter saws feature extendable arms that can reach as far as most boards, making cross-cut capacity a non-issue.

Are single bevel knives better? ›

Single bevel knives are favored in specific types of cooking, such as Japanese, as they offer a key advantage – they are extremely sharp. This is due to the fact they only need to be honed on one side so it is easier to create a much smaller, thus sharper, angle.

What is the advantage of single bevel broadheads? ›

The most obvious functional difference between single and double-beveled broadheads is the rotation single-bevels induce as the broadhead penetrates. Everyone knows that arrows rotate in flight, because of the effect of the fletching. Few, however, give arrow rotation any thought beyond that.

What is the difference between a mitre cut and a bevel cut? ›

A miter cut is made at an angle other than 90°, with the blade vertical. A bevel cut is made with the blade tilted over. A compound miter cut is a combination of a miter and bevel cut.

What does double bevel mean? ›

A dual bevel miter saw has a head that rotates, or bevels, in both directions, left and right. Thus it can make bevel cuts (see above) in both directions.

How do you sharpen a single bevel blade? ›

Sharpening Single Bevel Knives (A Demonstration) - YouTube

How do you sharpen a single edge blade? ›

For the sharpening angle, place the knife on the stone, hold down the cutting edge so that the blade is slightly levered up to the right angle, and sharpen. Place your left hand in the place you want to sharpen, move back and forth around 20 times and sharpen until the burr appears.

Why do Japanese knives have single bevels? ›

Traditional Japanese knives use a single bevel, where the angle of the knife is formed on one side of the blade only. Single bevel knives are favoured by Japanese chefs because they are extremely sharp and allow long precise cuts as they correct the natural inward cutting action of the chef.

Do I need left or right bevel broadheads? ›

If your arrows are fletched with right wing feathers, you should use right beveled broadheads; likewise, use left beveled broadheads if you use left wing feathers. (With straight fletching, it really doesn't matter which bevel you use as there is very little rotation of the shaft.)

What is the difference between a single bevel and double bevel Broadhead? ›

An added benefit of single-bevel heads is that they supposedly spin around bone. This might happen but is far from guaranteed. Double-bevel heads, on the other hand, feature two ground angles in the metal that meet to create a sharp edge.

Which way do single bevel broadheads turn? ›

Understanding Right And Left Wing Feathers And Single Bevel ...

When would you use a bevel cut? ›

Generally, bevel cuts are used in carpentry to create small pieces of wood that are more aesthetically pleasing and resistant to weathering. Furthermore, bevel cuts are also used to soften the edge of wood. For example, a wood piece with a bevel cut can serve as trim around the base of a wall.

Do you push or pull a sliding miter saw? ›

Sliding miter saws are designed to cut on the push stroke. Pulling a miter saw through the cut results in a climb cut that could cause the blade to rise up out of the wood and chase after you.

What is the purpose of a bevel cut? ›

Bevel Cuts

Conversely, a bevel cut allows the blade to tilt left and/or right from its 90˚ angle to the table surface in order to make cuts that move through the board at an angle from top to bottom. A bevel cut changes the vertical angle of the blade. It no longer remains at 90 degrees (square) to the base.

What's the difference between a compound miter saw and a miter saw? ›

A standard miter saw (also known as a compound miter saw) is designed to make angled crosscuts. Some basic miter saws let you choose the angle of this cut, whereas others come with pre-set angles, such as 15, 30, and 45 degrees.

How do you use a dual bevel miter saw? ›

DEWALT 779 (DWS780) Double Bevel Compound Sliding Miter Saw ...

Do all miter saws make bevel cuts? ›

Types of Miter Saws and Cuts They Make

A miter is an angled cut made across the face, or width, of a board. A bevel is an angled cut made through the thickness of a board. Any miter saw can cut a miter and a bevel, depending on how the board is placed onto the saw.

Videos

1. How to Sand Like a Pro - My Favorite Sanding Tip
(Jonathan Katz-Moses)
2. How to Make a Wood Sign for Beginners
(Scott Saws on Skates)
3. How to Adjust Table Saw Blade Angle for Precision Cuts
(Scott Saws on Skates)
4. SKATEPLATE CIRCULAR SAW GUIDE FOR SMOOTH STRAIGHT CUTS!
(markthomasbuilder)
5. DIY Miter Saw Station
(Scott Saws on Skates)
6. How to Use a Circular Saw to Cut Wood - Power Tools Tutorials - Thrift Diving
(Thrift Diving)

Top Articles

Latest Posts

Article information

Author: Dan Stracke

Last Updated: 01/21/2023

Views: 6555

Rating: 4.2 / 5 (63 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Dan Stracke

Birthday: 1992-08-25

Address: 2253 Brown Springs, East Alla, OH 38634-0309

Phone: +398735162064

Job: Investor Government Associate

Hobby: Shopping, LARPing, Scrapbooking, Surfing, Slacklining, Dance, Glassblowing

Introduction: My name is Dan Stracke, I am a homely, gleaming, glamorous, inquisitive, homely, gorgeous, light person who loves writing and wants to share my knowledge and understanding with you.